Glory Sun Lighting Limited
Glory Sun Lighting Limited Saving energy as possible, Brightening the world as we can!
Add to Cart
Aluminum High Power Indoor LED Spotlights GU10 MR16 LED Spotlighting
1. Fully compatible for traditional MR16 halogen spotlight
2. Compatiable to electronic transformer
3. No ultraviolet and infrared ray, and no mercury.
4. Greatly reduce energy consumption and operating cost
5. With the aluminum substrate have good thermal radiation.
6. Long span life
7. Low lumen depreciation
8. Full range of colors
9. Brighter than traditional incandescent lamps
Applications:
1. Home and office lighting
2. Commercial and industrial lighting
3. School and college lighting
4. Showcase lighting, bar lighting, display case accent, artworking lighting, mood lighting, amusement park accent
5. Warehouse lighting, hotel and restaraunt lighting.
Specifications:
| Model Name | Indoor LED Spotlight |
| Model No. | GSE5305A |
| Power | 5watts |
| Size | Φ50*H53mm |
| Operating Voltage | AC/DC 12V ; |
| Frequence | 50-60HZ |
| Emitting color | Warm White |
| Light Source | 1pcs COB Chip |
| Color temperature | 2700-3200K |
| Luminous flux | 390-450m |
| Service life | >50,000 Hours |
| Housing Material | Tensile aluminum + Glass cover |
| CRI | >70 |
| Power Factor | >0.9 |
| Base Type | GU5.3 |
| Spot light Shape | MR16 |
| Veiwing Angle | 38/90° |
| Working Temperature | -25 to 45 °C |
Competitive advantages:
1. Unique housing design, pure aluminum, anti-crossion, not fade.
2. High quality COB led chips, long lifespan, low light decay.
3. Constant circuit power supply, meet the international safety standard.
4. Special Glass or PMMA lens, can spread and make beautiful light spot, greatly protect humen eyes.
5. Low power consumption, high power efficiency, energy-saving and environmental-friendly
6. No UV and IR radiation, is safe cold-light source
7. Low maintenance and short payback period
8. Super long lifespan up to 50,000 hours
Installation:
1. Remove the non-functioning bulb from its socket. This can usually be done by removing a retaining clip with your fingers, then removing the UV-coated circular glass pane. After the UV glass pane is removed, you can pull the bulb and wiring harness from the housing. Remove the bulb by pulling it away from the harness with one hand while holding on to the harness with the other.
2. Insert the new bulb by pressing the two exposed pins on the rear of the bulb into the two holes in the harness.
3. Replace the bulb and harness into the housing, then replace the glass pane and retaining clip.
Notice:
1. MR16 LED spotlight is 12V only
2. It requires led driver (transformer) to run it. Please choose right power supply to match the product
3. Do not see the light sources by eyes directly
4. Please make sure the power is off before use
5. Please do not touch the product surface when it is lighting
6. Indoor use only
7. Please do not put the product as children toy